This CNC-machined high volume pump, produces approximately 80 psi of oil pressure, and comes with our 1/4" thick Pro Oil Pump Plate installed. A stock pickup is included, but is not installed.

Our Pro oil pump plate is laser cut, then precision-machined to be 100-percent flat, for a superior seal to the pump housing.

These are Melling select pumps with the following features not found on standard pumps:

• CNC machined bodies
• billet gears
• tighter tolerances
• phosphate coat body

For best performance the stock pickup (for use with stock oil pans only) should be installed by the builder and leveled on the engine then welded in place.

Back